-
“Baby is moving” status incorrect
When the breathing monitor is on, the “baby is moving” status will display instead of the breaths per minute when the baby isn’t moving at all. Is there something I can do to make sure the camera is capturing the breathing activity and motion more accurately? His breathing band is as tight as necessary, his bassinet is…
-
Breathing monitoring
Last night my baby removed his breathing band but the nanit failed to detect it had been removed. It kept recording BPM and was intermittently changing from "bpm" to "measuring bpm". How is this possible? Concerning that its able to detect breathing when the band is off.
-
Breathing monitoring not starting
I am launching a breathing monitoring session and Nanit is telling me that movement has been found, and then as soon as it says that- immediately it says it can’t see the breathing band and do I want to end my session. I have tried it five times and the same thing keeps happening. Meanwhile the band is in full view. Photo…
-
Breathing wear stops
we use the breathing band with solid color pj’s and solid color crib sheet every night and more then once a night since July I have woken up with the monitor no longer detecting we have never had a red alert or any alert for that matter it just completely stops monitoring I leave the app open all night on my phone with my…
-
Auto start breathing monitor
Hello, I am trying to use the "auto start breathing monitor" feature with my nanit camera. It says that it should detect the baby and engage the breathing monitor automatically, however I have not found this to be the case. I've waited up to 15 minutes to see if it clicks on but each time I've had to go into the app and…
-
Unknown Failure
The last few nights my breathing alerts have not been working properly. It keeps turning the breathing motion off and says that there is an unknown failure. It will do it numerous times. When it is working, it constantly says it is measuring breathing. I have used my camera for over a year and I have never had this issues.…
-
Breathing wear not connecting - showing connecting 1/3
Breathing motion monitoring not working all of a sudden this week. Consistently showing "connecting 1/3". My nanit is 2 months old. I've done EVERYTHING to troubleshoot - I've reset the camera, unplugged and plugged back in, deleted app and downloaded again, switched bandwidths and wifi bands, reset wifi and router and…
-
Breathing Monitor fails at "connecting"
Please see attached. It does this since today, with or without the baby. Video streaming itself works fine, only breathing monitor fails to initiate. Tried restarting, power off/on, logging in/out/. Client: Android app. Everything latest version, 4.0.3 Android, Camera firmware: 6.23.530
-
Breathing wear not going off
Hi, So my alarm never went off and the breathing wear stoped tracking my daughters breathing. Instead it just sent me a notification. This has happened three times in one night. How do I make sure this doesn’t continue to happen???
-
Breaths per minute
Is 19 breaths per minute normal for a 9 month old? I saw in the range provided the lowest was 22. When is the number a concern that I should be mentioning it to my pediatrician? He is wearing the large breathing band
-
How to check if the breathing wear alert system actually works?
How can we check if the breathing wear actually works? As in how can we make sure the red alerts go off if it detects no breathing?
-
Needs room for improvement for twin compatibility.
Split screen is still buggy and tends to stop showing live feed for one of the cameras, it does restart the feed. Ive tried making sure network connection is stable also. Running a business grade mesh routers. Both cameras are on a 5 GHz network and only the cameras are in that network no other device. I have two cameras…
-
Nanit stuck on connecting for breathing wear (Jun 22)
this has not been resolved. I did everything recommended. Logged out. Logged in. Deleted app. Turned off phone. Now I can’t even get into the app anymore to see the camera feed. I’m a yearly subscriber, why do we even pay for this if we can’t use it ? I’ll be sleeping in my babies room tonight I guess.
-
Trying to connect to breathing motion and it’s stuck on connecting (Jun 20-21)
Trying to connect to breathing motion and it’s stuck on connecting 1/3. I tried unplugging the Nanit and plugging it back in. Tried unplugging my router and plugging it back in and tried closing the app and reopening and nothing is working :(
-
Breathing band stuck on connecting
hi there I have a Nanit pro and I have twins. Overnight my nanit for my daughter the camera won’t connect to the breathing band. I’ve reset the camera several times… I’ve unplugged from the wall and just took the camera off. I’ve updated my app. What’s weird is my camera always works if I’m on my phones network or the…